زینک ریچ اپوکسی

The first step is to clean the polyurethane flooring, which is done in different ways according to its dirty condition, after which the floor should be sanded for more cleanness and creating suitable scratches. After completing these two steps, the primer coating should be applied on the floor. In this step, the diluted polyurethane liquid with high permeability should be poured on the floor. Creating a surface with high adhesion will protect the next layer from the separation of the floor in the future.

Therefore, the life and durability of the flooring directly depends on the quality of the primer, and choosing the right type of primer and the dryness and cleanliness of the surface when doing it is very important. One of the most important issues that should be considered before applying the primer is the complete dryness of the surface and not paying attention to it will cause a lot of damage.

One of the main problems of polymer flooring including epoxy flooring, polyurethane flooring, as well as PVC roll flooring in all companies is that they are difficult to clean after getting dirty compared to ceramics and glossy stones, so to solve this problem many companies Multi-color designs are used in the production of these floors, and the use of light-colored monochromatic floors in crowded places will be one of the challenges of flooring after a while that even quality quality cleaners can not solve this problem. It is efficient and removes all dirt and grime on the floor in a few seconds without any color change.

The way to use this detergent is that due to the dirt, the floor of pure detergent is mixed with a suitable percentage of water and poured on the floor and spread with T, then it is rubbed on the surface several times with a rough broom and after finishing the whole surface is washed with water. , Clean and dirt is removed and finally delivered as a surface like the first day

It is one of the products of Farapooyesh which is produced on the basis of epoxy bisphenol A and hardener polyamine resin. Suitable and high quality and features as follows have many customers and is one of the main products of the company.

Excellent rolling property that creates smooth, undulating surfaces. It does not bubble due to having quality anti-bubble material. Due to the lack of inactive solvents, its strength and scratch-resistant properties are excellent. They do not catch fish due to high quality materials and advanced formulation. Its surface is not distorted due to its quality materials and proper formulation. It can be supplied in various colors according to the order. Can be ordered in relatively small quantities. It is very hard and does not get scratches easily.

Epoxy hardeners

Hardeners used in the flooring industry are mainly divided into the following two main groups

Polyamide hardeners: This group of hardeners are mainly used in epoxy and primer paints and are widely used due to the following suitable properties: They are flexible, have high resistance to impact and chemicals, and due to their high adhesion to concrete and good moisture resistance in industry. Flooring is mainly used as a hardener primer.

Polyamine hardeners

IH Polyamine hardener These hardeners are widely used in industry, especially in the flooring industry, and are used for floor coverings and layers. This hardener with relatively good chemical resistance is usually used in layers and veneers. The resin hardens after drying and dries at room temperature.