Zinc rich epoxy
Related products
Polyurethane resin
Polyurethanes are polymers that have a urethane bond. This bond is formed by incremental adsorption between an isocyanate group and an active hydrogen compound. Isocyanate groups are highly reactive and therefore do not require an increase in temperature to advance their reaction. Polyurethane resistance to abrasion, impact and cracking is very good and hardens at ambient temperature and its resistance to sunlight is much higher than the epoxy group.
Polyurethane floor thinner
These diluents do not react and evaporate and usually have high evaporation and should not be used as much as possible, but in many projects their use is necessary to reduce viscosity and should be used to a limited extent. It should be noted that they should be considered, including the reduction of the final strength after drying, the risk of fire, evaporation and the risk of respiration and poisoning due to it is of great importance.
Calcium carbonate powder
Calcium carbonate is a widely used substance in the earth's crust. Calcium carbonate is a type of sedimentary rock that has formed over millions of years. Calcium carbonate is found in mines in the form of calcite, aragonite, marble, limestone.
This material has a high melting point of about 1339 degrees Celsius and is non-flammable and non-toxic.
This mineral is widely used cheaply and is a suitable filler in many applications in the paint industry
Epoxy floor thinner
Active or reactive epoxy thinners
These diluents participate in the reaction and form part of the non-volatile binder. These diluents are non-volatile and do not evaporate. These low-viscosity liquids, when mixed with the original resin, reduce the final viscosity. In addition, the diluents improve the resin flexibility and the air bubbles formed leave the reaction faster.
Inactive epoxy thinners
These diluents do not react and are volatile and usually have high evaporation. These solvents reduce viscosity and cause problems such as reduced final strength after drying, risk of fire, evaporation and risk of poisoning by it.
Barite powder
Barite is the most common barium mineral in nature and is an important additive in many industries, especially in the paint industry as a filler. This mineral has a specific gravity of more than 4 and its powder color is from white to gray.
Barite is widely used in the oil and gas drilling industry due to its neutrality, reasonable price, high specific gravity. The great advantage of barite in the paint industry is that it has no pigment effect and is used for uniform distribution of colored particles. And usually comes in 20 kg bags.
Types of epoxy hardener
Epoxy hardeners
Hardeners used in the flooring industry are mainly divided into the following two main groups
Polyamide hardeners: This group of hardeners are mainly used in epoxy and primer paints and are widely used due to the following suitable properties: They are flexible, have high resistance to impact and chemicals, and due to their high adhesion to concrete and good moisture resistance in industry. Flooring is mainly used as a hardener primer.
Polyamine hardeners
IH Polyamine hardener These hardeners are widely used in industry, especially in the flooring industry, and are used for floor coverings and layers. This hardener with relatively good chemical resistance is usually used in layers and veneers. The resin hardens after drying and dries at room temperature.
Polyurethane flooring primer
The first step is to clean the polyurethane flooring, which is done in different ways according to its dirty condition, after which the floor should be sanded for more cleanness and creating suitable scratches. After completing these two steps, the primer coating should be applied on the floor. In this step, the diluted polyurethane liquid with high permeability should be poured on the floor. Creating a surface with high adhesion will protect the next layer from the separation of the floor in the future.
Therefore, the life and durability of the flooring directly depends on the quality of the primer, and choosing the right type of primer and the dryness and cleanliness of the surface when doing it is very important. One of the most important issues that should be considered before applying the primer is the complete dryness of the surface and not paying attention to it will cause a lot of damage.
