پودر سیلیس

The first step is to clean the polyurethane flooring, which is done in different ways according to its dirty condition, after which the floor should be sanded for more cleanness and creating suitable scratches. After completing these two steps, the primer coating should be applied on the floor. In this step, the diluted polyurethane liquid with high permeability should be poured on the floor. Creating a surface with high adhesion will protect the next layer from the separation of the floor in the future.

Therefore, the life and durability of the flooring directly depends on the quality of the primer, and choosing the right type of primer and the dryness and cleanliness of the surface when doing it is very important. One of the most important issues that should be considered before applying the primer is the complete dryness of the surface and not paying attention to it will cause a lot of damage.

Active or reactive epoxy thinners

These diluents participate in the reaction and form part of the non-volatile binder. These diluents are non-volatile and do not evaporate. These low-viscosity liquids, when mixed with the original resin, reduce the final viscosity. In addition, the diluents improve the resin flexibility and the air bubbles formed leave the reaction faster.

Inactive epoxy thinners

These diluents do not react and are volatile and usually have high evaporation. These solvents reduce viscosity and cause problems such as reduced final strength after drying, risk of fire, evaporation and risk of poisoning by it.

Static electricity generated by the movement of people and sparks caused by it can be dangerous in many places and cause heavy financial and human damage, so due to this issue in hospitals in operating rooms and ICU for Prevent potential errors and damage Conductive flooring equipment, which is more conductive than antistatic flooring, is installed and installed. In addition, in many factories where sparks can cause explosions, antistatic or conductive flooring is used to prevent this danger. Due to the importance of the issue of using quality materials for flooring, it is of special importance to be able to direct static electricity from our body through the floor and then copper strips to the well.

Antistatic and conductive floor coverings and primers of Farapoosh Company with the following outstanding properties are formulated with the best raw materials and can meet all the standards of these floors.

The materials of these floors can be produced and ordered with the following codes

Antistatic, conductive floor primer: ………… ..

Antistatic floor covering: ………….

Conductive flooring: ………….