Silica powder

Active or reactive epoxy thinners

These diluents participate in the reaction and form part of the non-volatile binder. These diluents are non-volatile and do not evaporate. These low-viscosity liquids, when mixed with the original resin, reduce the final viscosity. In addition, the diluents improve the resin flexibility and the air bubbles formed leave the reaction faster.

Inactive epoxy thinners

These diluents do not react and are volatile and usually have high evaporation. These solvents reduce viscosity and cause problems such as reduced final strength after drying, risk of fire, evaporation and risk of poisoning by it.

 :Epoxy primer

The first step is to clean the floor with epoxy flooring, which is done in different ways according to its dirty condition, after which the floor should be sanded for as much cleaning as possible and to create suitable scratches and scratches. After completing these two steps, primer coating should be done on the floor. In this stage, dilute epoxy liquid with high permeability should be poured on the floor with good adhesion after drying to be able to insulate the surface in terms of moisture passage with the necessary strength and create High adhesion surface to protect the next layer from the separation of the floor in the future. Therefore, the life and durability of the floor directly depends on the quality of the primer and choosing the right type of primer and dryness and cleanliness of the surface when doing it is very important. Epoxy floor primers They are mainly divided into the following two groups:

Epoxy Polyamide Flooring Primer: EPD-01

This primer is produced and presented based on bisphenol () and hardener polyamide () resin. In the production of this product, a special composite solvent is used, which reduces the viscosity of the product to increase its penetration into concrete and substrate. This product has a very good adhesion to the floor and the subsequent layers adhere well to it, and also due to its good flexibility, it does not crack or break.

EPN-06 Epoxy Polyamine Flooring Primer

This type of primer is produced and presented on the basis of bisphenol () and polyamine () hardener resin and its viscosity is reduced by a special solvent and penetrates the concrete surface and hardens after hardening of the concrete surface. This product is mostly sensitive to floor moisture. It is used in very dry places and special places and its surface becomes hard and brittle due to being more expensive and also the above mentioned cases. In most places, polyamide primer is used for epoxy flooring.

Epoxy hardeners

Hardeners used in the flooring industry are mainly divided into the following two main groups

Polyamide hardeners: This group of hardeners are mainly used in epoxy and primer paints and are widely used due to the following suitable properties: They are flexible, have high resistance to impact and chemicals, and due to their high adhesion to concrete and good moisture resistance in industry. Flooring is mainly used as a hardener primer.

Polyamine hardeners

IH Polyamine hardener These hardeners are widely used in industry, especially in the flooring industry, and are used for floor coverings and layers. This hardener with relatively good chemical resistance is usually used in layers and veneers. The resin hardens after drying and dries at room temperature.