Calcium carbonate powder
Calcium carbonate is a widely used substance in the earth’s crust. Calcium carbonate is a type of sedimentary rock that has formed over millions of years. Calcium carbonate is found in mines in the form of calcite, aragonite, marble, limestone.
This material has a high melting point of about 1339 degrees Celsius and is non-flammable and non-toxic.
This mineral is widely used cheaply and is a suitable filler in many applications in the paint industry
Related products
Silica powder
Silica is an abundant mineral in the Earth's crust that has been widely used in many industries, including electronics and computers, construction, health, paint and many other industries, and its use is expanding every day.
In the paint industry, silica powder is used as a filler in various meshes and increases the wear resistance of the floor.
پودر کربنات کلیسیم
کربنات کلسیم یک ماده پرکاربرد و فراوان در پوسته زمین است . کربنات کلسیم نوعی سنگ رسوبی است که در طی میلیونها سال تشکیل شده است . کربنات کلسیم در معادن به شکل کلسیت ، آراگونیت ، ،سنگ مرمر، سنگ آهک یافت میشود .
این ماده نقطه ذوب بالایی حدود 1339 درجه سانتیگراد داشته و غیر قابل اشتعال بوده و غیر سمی است .
این ماده معدنی و پر کاربرد ارزان بوده و فیلر مناسبی در بسیاری از کاربردها در صنعت رنگ میباشد
Epoxy resin
Resins used in the flooring industry are mainly divided into the following two main groups
Resins used in floor primers that are used with polyamide hardeners
Resins used in veneers and floor coverings, which are mainly used with polyamine hardeners, and the most popular is 828 resin.
Hexion Company, which is very famous due to its low viscosity and excellent adhesion, and chemical resistance.
It is very good and in dry weather it has little sensitivity to temperature changes and its mechanical properties do not change over time.
Resins that can be provided in translucent floors with 828 resin or its quality equivalent.
Antistatic and conductive flooring materials
Static electricity generated by the movement of people and sparks caused by it can be dangerous in many places and cause heavy financial and human damage, so due to this issue in hospitals in operating rooms and ICU for Prevent potential errors and damage Conductive flooring equipment, which is more conductive than antistatic flooring, is installed and installed. In addition, in many factories where sparks can cause explosions, antistatic or conductive flooring is used to prevent this danger. Due to the importance of the issue of using quality materials for flooring, it is of special importance to be able to direct static electricity from our body through the floor and then copper strips to the well.
Antistatic and conductive floor coverings and primers of Farapoosh Company with the following outstanding properties are formulated with the best raw materials and can meet all the standards of these floors.
The materials of these floors can be produced and ordered with the following codes
Antistatic, conductive floor primer: ………… ..
Antistatic floor covering: ………….
Conductive flooring: ………….
Types of epoxy hardener
Epoxy hardeners
Hardeners used in the flooring industry are mainly divided into the following two main groups
Polyamide hardeners: This group of hardeners are mainly used in epoxy and primer paints and are widely used due to the following suitable properties: They are flexible, have high resistance to impact and chemicals, and due to their high adhesion to concrete and good moisture resistance in industry. Flooring is mainly used as a hardener primer.
Polyamine hardeners
IH Polyamine hardener These hardeners are widely used in industry, especially in the flooring industry, and are used for floor coverings and layers. This hardener with relatively good chemical resistance is usually used in layers and veneers. The resin hardens after drying and dries at room temperature.
