Floor cleaners
One of the main problems of polymer flooring including epoxy flooring, polyurethane flooring, as well as PVC roll flooring in all companies is that they are difficult to clean after getting dirty compared to ceramics and glossy stones, so to solve this problem many companies Multi-color designs are used in the production of these floors, and the use of light-colored monochromatic floors in crowded places will be one of the challenges of flooring after a while that even quality quality cleaners can not solve this problem. It is efficient and removes all dirt and grime on the floor in a few seconds without any color change.
The way to use this detergent is that due to the dirt, the floor of pure detergent is mixed with a suitable percentage of water and poured on the floor and spread with T, then it is rubbed on the surface several times with a rough broom and after finishing the whole surface is washed with water. , Clean and dirt is removed and finally delivered as a surface like the first day
Related products
Polyurethane flooring primer
The first step is to clean the polyurethane flooring, which is done in different ways according to its dirty condition, after which the floor should be sanded for more cleanness and creating suitable scratches. After completing these two steps, the primer coating should be applied on the floor. In this step, the diluted polyurethane liquid with high permeability should be poured on the floor. Creating a surface with high adhesion will protect the next layer from the separation of the floor in the future.
Therefore, the life and durability of the flooring directly depends on the quality of the primer, and choosing the right type of primer and the dryness and cleanliness of the surface when doing it is very important. One of the most important issues that should be considered before applying the primer is the complete dryness of the surface and not paying attention to it will cause a lot of damage.
پودر کربنات کلیسیم
کربنات کلسیم یک ماده پرکاربرد و فراوان در پوسته زمین است . کربنات کلسیم نوعی سنگ رسوبی است که در طی میلیونها سال تشکیل شده است . کربنات کلسیم در معادن به شکل کلسیت ، آراگونیت ، ،سنگ مرمر، سنگ آهک یافت میشود .
این ماده نقطه ذوب بالایی حدود 1339 درجه سانتیگراد داشته و غیر قابل اشتعال بوده و غیر سمی است .
این ماده معدنی و پر کاربرد ارزان بوده و فیلر مناسبی در بسیاری از کاربردها در صنعت رنگ میباشد
انواع هاردنر اپوکسی
هاردنرهای اپوکسی
هاردنرهای مورد مصرف در صنعت کفپوش عمدتا به دو گروه عمده اصلی زیر تقسیم میشوند
هاردنرهای پلی آمید : این گروه از هاردنرها عمدتا در رنگهای اپوکسی و پرایمر کاربرد داشته و بدلایل خصوصیات مناسب زیر استفاده گسترده ای دارند : انعطاف پذیرند مقاومت بالا نسبت به ضربه و مواد شیمیایی دارند و بدلیل چسبندگی بالا به بتن و مقتاومت مناسب به رطوبت در صنعت کفپوش عمدتا بعنوان هاردنر پرایمر مورد استفاده قرار میگیرد .
هاردنرهای پلی آمین
IHهاردنر پلی آمین این هاردنرها بسیار در صنعت و بخصوص صنعت کفپوش کاربرد داشته و برای روکش و لایه های کفپوش استفاده میشود این هاردنر بامقاومت شیمیایی نسبتا خوب معمولا در لایه ها و روکش استفاده میشودو رزین پس از خشک شدن بسیار سخت گردیده ودر دمای اتاق خشک میگردد
Polyurethane resin
Polyurethanes are polymers that have a urethane bond. This bond is formed by incremental adsorption between an isocyanate group and an active hydrogen compound. Isocyanate groups are highly reactive and therefore do not require an increase in temperature to advance their reaction. Polyurethane resistance to abrasion, impact and cracking is very good and hardens at ambient temperature and its resistance to sunlight is much higher than the epoxy group.
The middle layer of polyurethane flooring
Farapooyesh with the following properties is one of the high quality materials available in the Iranian market, which with its suitable viscosity and at a very reasonable price compared to competitors is one of the popular middle layer materials among performers and has been used in many projects in the country. Proper viscosity Excellent adhesion to the floor and reasonable price is the most important feature of this product.
Polyurethane floor thinner
These diluents do not react and evaporate and usually have high evaporation and should not be used as much as possible, but in many projects their use is necessary to reduce viscosity and should be used to a limited extent. It should be noted that they should be considered, including the reduction of the final strength after drying, the risk of fire, evaporation and the risk of respiration and poisoning due to it is of great importance.
