Epoxy flooring material
Related products
Polyurethane flooring primer
The first step is to clean the polyurethane flooring, which is done in different ways according to its dirty condition, after which the floor should be sanded for more cleanness and creating suitable scratches. After completing these two steps, the primer coating should be applied on the floor. In this step, the diluted polyurethane liquid with high permeability should be poured on the floor. Creating a surface with high adhesion will protect the next layer from the separation of the floor in the future.
Therefore, the life and durability of the flooring directly depends on the quality of the primer, and choosing the right type of primer and the dryness and cleanliness of the surface when doing it is very important. One of the most important issues that should be considered before applying the primer is the complete dryness of the surface and not paying attention to it will cause a lot of damage.
Epoxy flooring
It is one of the products of Farapooyesh which is produced on the basis of epoxy bisphenol A and hardener polyamine resin. Suitable and high quality and features as follows have many customers and is one of the main products of the company.
Excellent rolling property that creates smooth, undulating surfaces. It does not bubble due to having quality anti-bubble material. Due to the lack of inactive solvents, its strength and scratch-resistant properties are excellent. They do not catch fish due to high quality materials and advanced formulation. Its surface is not distorted due to its quality materials and proper formulation. It can be supplied in various colors according to the order. Can be ordered in relatively small quantities. It is very hard and does not get scratches easily.
Floor cleaners
One of the main problems of polymer flooring including epoxy flooring, polyurethane flooring, as well as PVC roll flooring in all companies is that they are difficult to clean after getting dirty compared to ceramics and glossy stones, so to solve this problem many companies Multi-color designs are used in the production of these floors, and the use of light-colored monochromatic floors in crowded places will be one of the challenges of flooring after a while that even quality quality cleaners can not solve this problem. It is efficient and removes all dirt and grime on the floor in a few seconds without any color change.
The way to use this detergent is that due to the dirt, the floor of pure detergent is mixed with a suitable percentage of water and poured on the floor and spread with T, then it is rubbed on the surface several times with a rough broom and after finishing the whole surface is washed with water. , Clean and dirt is removed and finally delivered as a surface like the first day
Calcium carbonate powder
Calcium carbonate is a widely used substance in the earth's crust. Calcium carbonate is a type of sedimentary rock that has formed over millions of years. Calcium carbonate is found in mines in the form of calcite, aragonite, marble, limestone.
This material has a high melting point of about 1339 degrees Celsius and is non-flammable and non-toxic.
This mineral is widely used cheaply and is a suitable filler in many applications in the paint industry
Polyurethane floor thinner
These diluents do not react and evaporate and usually have high evaporation and should not be used as much as possible, but in many projects their use is necessary to reduce viscosity and should be used to a limited extent. It should be noted that they should be considered, including the reduction of the final strength after drying, the risk of fire, evaporation and the risk of respiration and poisoning due to it is of great importance.
Polyurethane resin
Polyurethanes are polymers that have a urethane bond. This bond is formed by incremental adsorption between an isocyanate group and an active hydrogen compound. Isocyanate groups are highly reactive and therefore do not require an increase in temperature to advance their reaction. Polyurethane resistance to abrasion, impact and cracking is very good and hardens at ambient temperature and its resistance to sunlight is much higher than the epoxy group.
