Epoxy resin
Resins used in the flooring industry are mainly divided into the following two main groups
Resins used in floor primers that are used with polyamide hardeners
Resins used in veneers and floor coverings, which are mainly used with polyamine hardeners, and the most popular is 828 resin.
Hexion Company, which is very famous due to its low viscosity and excellent adhesion, and chemical resistance.
It is very good and in dry weather it has little sensitivity to temperature changes and its mechanical properties do not change over time.
Resins that can be provided in translucent floors with 828 resin or its quality equivalent.
Related products
Floor cleaners
One of the main problems of polymer flooring including epoxy flooring, polyurethane flooring, as well as PVC roll flooring in all companies is that they are difficult to clean after getting dirty compared to ceramics and glossy stones, so to solve this problem many companies Multi-color designs are used in the production of these floors, and the use of light-colored monochromatic floors in crowded places will be one of the challenges of flooring after a while that even quality quality cleaners can not solve this problem. It is efficient and removes all dirt and grime on the floor in a few seconds without any color change.
The way to use this detergent is that due to the dirt, the floor of pure detergent is mixed with a suitable percentage of water and poured on the floor and spread with T, then it is rubbed on the surface several times with a rough broom and after finishing the whole surface is washed with water. , Clean and dirt is removed and finally delivered as a surface like the first day
Zinc Rich primer coating
Zinc Reach coatings are paints that have large amounts of zinc particles in their formulation along with resin and other additives to protect steel or other metals that are in very hard and permanent corrosion conditions. Zinc metal powder in these coatings is sacrificed. In these environments, it prevents corrosion and decay of the main metal and gives it electrochemical or cathodic protection.
Zinc Rich epoxy coating is two-component as a primer and primer is applied on the metal in the first layer and is very suitable for protecting the metal in marine and wet environments.
انواع هاردنر اپوکسی
هاردنرهای اپوکسی
هاردنرهای مورد مصرف در صنعت کفپوش عمدتا به دو گروه عمده اصلی زیر تقسیم میشوند
هاردنرهای پلی آمید : این گروه از هاردنرها عمدتا در رنگهای اپوکسی و پرایمر کاربرد داشته و بدلایل خصوصیات مناسب زیر استفاده گسترده ای دارند : انعطاف پذیرند مقاومت بالا نسبت به ضربه و مواد شیمیایی دارند و بدلیل چسبندگی بالا به بتن و مقتاومت مناسب به رطوبت در صنعت کفپوش عمدتا بعنوان هاردنر پرایمر مورد استفاده قرار میگیرد .
هاردنرهای پلی آمین
IHهاردنر پلی آمین این هاردنرها بسیار در صنعت و بخصوص صنعت کفپوش کاربرد داشته و برای روکش و لایه های کفپوش استفاده میشود این هاردنر بامقاومت شیمیایی نسبتا خوب معمولا در لایه ها و روکش استفاده میشودو رزین پس از خشک شدن بسیار سخت گردیده ودر دمای اتاق خشک میگردد
Polyurethane floor thinner
These diluents do not react and evaporate and usually have high evaporation and should not be used as much as possible, but in many projects their use is necessary to reduce viscosity and should be used to a limited extent. It should be noted that they should be considered, including the reduction of the final strength after drying, the risk of fire, evaporation and the risk of respiration and poisoning due to it is of great importance.
Barite powder
Barite is the most common barium mineral in nature and is an important additive in many industries, especially in the paint industry as a filler. This mineral has a specific gravity of more than 4 and its powder color is from white to gray.
Barite is widely used in the oil and gas drilling industry due to its neutrality, reasonable price, high specific gravity. The great advantage of barite in the paint industry is that it has no pigment effect and is used for uniform distribution of colored particles. And usually comes in 20 kg bags.
