Zinc Rich primer coating
Zinc Reach coatings are paints that have large amounts of zinc particles in their formulation along with resin and other additives to protect steel or other metals that are in very hard and permanent corrosion conditions. Zinc metal powder in these coatings is sacrificed. In these environments, it prevents corrosion and decay of the main metal and gives it electrochemical or cathodic protection.
Zinc Rich epoxy coating is two-component as a primer and primer is applied on the metal in the first layer and is very suitable for protecting the metal in marine and wet environments.
Related products
Epoxy floor thinner
Active or reactive epoxy thinners
These diluents participate in the reaction and form part of the non-volatile binder. These diluents are non-volatile and do not evaporate. These low-viscosity liquids, when mixed with the original resin, reduce the final viscosity. In addition, the diluents improve the resin flexibility and the air bubbles formed leave the reaction faster.
Inactive epoxy thinners
These diluents do not react and are volatile and usually have high evaporation. These solvents reduce viscosity and cause problems such as reduced final strength after drying, risk of fire, evaporation and risk of poisoning by it.
پودر کربنات کلیسیم
کربنات کلسیم یک ماده پرکاربرد و فراوان در پوسته زمین است . کربنات کلسیم نوعی سنگ رسوبی است که در طی میلیونها سال تشکیل شده است . کربنات کلسیم در معادن به شکل کلسیت ، آراگونیت ، ،سنگ مرمر، سنگ آهک یافت میشود .
این ماده نقطه ذوب بالایی حدود 1339 درجه سانتیگراد داشته و غیر قابل اشتعال بوده و غیر سمی است .
این ماده معدنی و پر کاربرد ارزان بوده و فیلر مناسبی در بسیاری از کاربردها در صنعت رنگ میباشد
The middle layer of epoxy flooring
It is one of the products of Farapooyesh, which is produced on the basis of epoxy bisphenol A and hardener polyamine resin. Used. Proper viscosity Excellent adhesion to the floor and reasonable price is the most important feature of this product
Polyurethane resin
Polyurethanes are polymers that have a urethane bond. This bond is formed by incremental adsorption between an isocyanate group and an active hydrogen compound. Isocyanate groups are highly reactive and therefore do not require an increase in temperature to advance their reaction. Polyurethane resistance to abrasion, impact and cracking is very good and hardens at ambient temperature and its resistance to sunlight is much higher than the epoxy group.
Epoxy resin
Resins used in the flooring industry are mainly divided into the following two main groups
Resins used in floor primers that are used with polyamide hardeners
Resins used in veneers and floor coverings, which are mainly used with polyamine hardeners, and the most popular is 828 resin.
Hexion Company, which is very famous due to its low viscosity and excellent adhesion, and chemical resistance.
It is very good and in dry weather it has little sensitivity to temperature changes and its mechanical properties do not change over time.
Resins that can be provided in translucent floors with 828 resin or its quality equivalent.
انواع هاردنر اپوکسی
هاردنرهای اپوکسی
هاردنرهای مورد مصرف در صنعت کفپوش عمدتا به دو گروه عمده اصلی زیر تقسیم میشوند
هاردنرهای پلی آمید : این گروه از هاردنرها عمدتا در رنگهای اپوکسی و پرایمر کاربرد داشته و بدلایل خصوصیات مناسب زیر استفاده گسترده ای دارند : انعطاف پذیرند مقاومت بالا نسبت به ضربه و مواد شیمیایی دارند و بدلیل چسبندگی بالا به بتن و مقتاومت مناسب به رطوبت در صنعت کفپوش عمدتا بعنوان هاردنر پرایمر مورد استفاده قرار میگیرد .
هاردنرهای پلی آمین
IHهاردنر پلی آمین این هاردنرها بسیار در صنعت و بخصوص صنعت کفپوش کاربرد داشته و برای روکش و لایه های کفپوش استفاده میشود این هاردنر بامقاومت شیمیایی نسبتا خوب معمولا در لایه ها و روکش استفاده میشودو رزین پس از خشک شدن بسیار سخت گردیده ودر دمای اتاق خشک میگردد
