Antistatic and conductive flooring materials
Static electricity generated by the movement of people and sparks caused by it can be dangerous in many places and cause heavy financial and human damage, so due to this issue in hospitals in operating rooms and ICU for Prevent potential errors and damage Conductive flooring equipment, which is more conductive than antistatic flooring, is installed and installed. In addition, in many factories where sparks can cause explosions, antistatic or conductive flooring is used to prevent this danger. Due to the importance of the issue of using quality materials for flooring, it is of special importance to be able to direct static electricity from our body through the floor and then copper strips to the well.
Antistatic and conductive floor coverings and primers of Farapoosh Company with the following outstanding properties are formulated with the best raw materials and can meet all the standards of these floors.
The materials of these floors can be produced and ordered with the following codes
Antistatic, conductive floor primer: ………… ..
Antistatic floor covering: ………….
Conductive flooring: ………….
Related products
Barite powder
Barite is the most common barium mineral in nature and is an important additive in many industries, especially in the paint industry as a filler. This mineral has a specific gravity of more than 4 and its powder color is from white to gray.
Barite is widely used in the oil and gas drilling industry due to its neutrality, reasonable price, high specific gravity. The great advantage of barite in the paint industry is that it has no pigment effect and is used for uniform distribution of colored particles. And usually comes in 20 kg bags.
انواع هاردنر اپوکسی
هاردنرهای اپوکسی
هاردنرهای مورد مصرف در صنعت کفپوش عمدتا به دو گروه عمده اصلی زیر تقسیم میشوند
هاردنرهای پلی آمید : این گروه از هاردنرها عمدتا در رنگهای اپوکسی و پرایمر کاربرد داشته و بدلایل خصوصیات مناسب زیر استفاده گسترده ای دارند : انعطاف پذیرند مقاومت بالا نسبت به ضربه و مواد شیمیایی دارند و بدلیل چسبندگی بالا به بتن و مقتاومت مناسب به رطوبت در صنعت کفپوش عمدتا بعنوان هاردنر پرایمر مورد استفاده قرار میگیرد .
هاردنرهای پلی آمین
IHهاردنر پلی آمین این هاردنرها بسیار در صنعت و بخصوص صنعت کفپوش کاربرد داشته و برای روکش و لایه های کفپوش استفاده میشود این هاردنر بامقاومت شیمیایی نسبتا خوب معمولا در لایه ها و روکش استفاده میشودو رزین پس از خشک شدن بسیار سخت گردیده ودر دمای اتاق خشک میگردد
Polyurethane resin
Polyurethanes are polymers that have a urethane bond. This bond is formed by incremental adsorption between an isocyanate group and an active hydrogen compound. Isocyanate groups are highly reactive and therefore do not require an increase in temperature to advance their reaction. Polyurethane resistance to abrasion, impact and cracking is very good and hardens at ambient temperature and its resistance to sunlight is much higher than the epoxy group.
Silica powder
Silica is an abundant mineral in the Earth's crust that has been widely used in many industries, including electronics and computers, construction, health, paint and many other industries, and its use is expanding every day.
In the paint industry, silica powder is used as a filler in various meshes and increases the wear resistance of the floor.
Zinc Rich primer coating
Zinc Reach coatings are paints that have large amounts of zinc particles in their formulation along with resin and other additives to protect steel or other metals that are in very hard and permanent corrosion conditions. Zinc metal powder in these coatings is sacrificed. In these environments, it prevents corrosion and decay of the main metal and gives it electrochemical or cathodic protection.
Zinc Rich epoxy coating is two-component as a primer and primer is applied on the metal in the first layer and is very suitable for protecting the metal in marine and wet environments.
